sdi2

(Return to Conductivity Sensors)

Model CS40 Conductivity Sensor
Click on part number above to request an RFQ or place an order online.

Measures conductivity directly in process temperatures up to 150°C
O-ring seals used on all versions for high on-stream reliability
Optional wet-tap valve allows insertion and removal while line is under pressure
The SDI Model CS40 sensor has been designed for a broad measurement range in difficult process conditions. It can be installed I in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical concentrations.
Application Notes
Wetted materials of construction are 316 stainless steel and Kel-F or Teflon, depending on the range of temperature required. All possible leak paths through the sensor are double sealed with EPR O-rings for maximum on-stream reliability. The front O-rings protect the back ones from chemical attack, giving more than double the service life than can be expected from single sealed units.
Process connections are made via a bored through swage fitting with 3/4" NPT threads. This fitting can be screwed into a line, a tank, or the optional wet-tap valve assembly. It can also be turned around and connected to a standpipe for use in a submersion configuration. Available probbe constants range from 0.01 to 20.0 giving it the broadest range of application of any of our sensor models.

SPECIFICATIONS
MAX. PRESSUREITEMP. RATINGS:
Standard Sensor - 100 PSIG at 150°C
Valve Assembly - 50 PSIG at all temps.
CONNECTIONS:
Process - 3/4" NPT for sensor/i " NPT for valve
Electrical - Spade lug terminations on cable; optional j-box has 3/4" hub and terminal strip to accept plain stripped wire ends, 14-24 ga.
WETTED MATERIALS:
Electrodes - 316 Stainless Steel
Insulator - Teflon
O-Rings - EPR
PROBE CONSTANT:
20/10/5/2/l/0.2/0.1/0.05/0.02/0.01
TEMPERATURE COMPENSATION:
Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.

(Return to Conductivity Sensors)
	Model CS40 Conductivity Sensor Click on part number above to request an RFQ or place an order online. Measures conductivity directly in process temperatures up to 150°C O-ring seals used on all versions for high on-stream reliability Optional wet-tap valve allows insertion and removal while line is under pressure The SDI Model CS40 sensor has been designed for a broad measurement range in difficult process conditions. It can be installed I in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical concentrations. Application Notes Wetted materials of construction are 316 stainless steel and Kel-F or Teflon, depending on the range of temperature required. All possible leak paths through the sensor are double sealed with EPR O-rings for maximum on-stream reliability. The front O-rings protect the back ones from chemical attack, giving more than double the service life than can be expected from single sealed units. Process connections are made via a bored through swage fitting with 3/4" NPT threads. This fitting can be screwed into a line, a tank, or the optional wet-tap valve assembly. It can also be turned around and connected to a standpipe for use in a submersion configuration. Available probbe constants range from 0.01 to 20.0 giving it the broadest range of application of any of our sensor models.
SPECIFICATIONS MAX. PRESSUREITEMP. RATINGS: Standard Sensor - 100 PSIG at 150°C Valve Assembly - 50 PSIG at all temps. CONNECTIONS: Process - 3/4" NPT for sensor/i " NPT for valve Electrical - Spade lug terminations on cable; optional j-box has 3/4" hub and terminal strip to accept plain stripped wire ends, 14-24 ga. WETTED MATERIALS: Electrodes - 316 Stainless Steel Insulator - Teflon O-Rings - EPR PROBE CONSTANT: 20/10/5/2/l/0.2/0.1/0.05/0.02/0.01 TEMPERATURE COMPENSATION: Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.