sdi2

(Return to Conductivity Sensors)

Model CS50 & 60 Conductivity Sensor
Click on part number above to request an RFQ or place an order online.

Double threaded body can be used for either submersion or insertion
0-ring seals used on all versions for high on-stream reliability
Can be used with many instrument brands by specifying proper TC
These sensors are designed for use in general purpose applications up to about 50,000 micromhos, and provide outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.
Application Notes
Wetted materials of construction are CPVC or Teflon/Kynar, with 316SS electrodes as standard. The option to select other metals as electrode materials provides an unequalled chemical resistance capability.
Dual O-ring seals of EPR increase sensor reliability and service life. The front seal absorbs the brunt of chemical attack, allowing the rear o-ring to operate in a protected environment, and insure continued sealing.
Probe constants from 0.1 to 2.0 are available. The ranges that can be achieved with these constants is dependent on the analyzer they are used with, but 10 to 50,000 ľmhos is the approximate area of use. TC selection is the key to using these sensors effectively with a variety of instrument makes.

SPECIFICATIONS
MAX. PRESSUREITEMP. RATINGS:
CS50 - 100 PSIG at 95°C
CS60 - 100 PSIG at 120°C
CONNECTIONS:
Process - 1" N PT
Electrical - Spade lug terminations on cable.
WETTED MATERIALS:
Insulator: CS50 - CPVC; CS60 - Teflon/Kynar
O-rings - EPR
Electrodes - 316SS standard, optional materials available on request.
PROBE CONSTANT:
2.0/1.0/0.2/0.1
TEMPERATURE COMPENSATION:
Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.

(Return to Conductivity Sensors)
	Model CS50 & 60 Conductivity Sensor Click on part number above to request an RFQ or place an order online. Double threaded body can be used for either submersion or insertion 0-ring seals used on all versions for high on-stream reliability Can be used with many instrument brands by specifying proper TC These sensors are designed for use in general purpose applications up to about 50,000 micromhos, and provide outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum. Application Notes Wetted materials of construction are CPVC or Teflon/Kynar, with 316SS electrodes as standard. The option to select other metals as electrode materials provides an unequalled chemical resistance capability. Dual O-ring seals of EPR increase sensor reliability and service life. The front seal absorbs the brunt of chemical attack, allowing the rear o-ring to operate in a protected environment, and insure continued sealing. Probe constants from 0.1 to 2.0 are available. The ranges that can be achieved with these constants is dependent on the analyzer they are used with, but 10 to 50,000 ľmhos is the approximate area of use. TC selection is the key to using these sensors effectively with a variety of instrument makes.
SPECIFICATIONS MAX. PRESSUREITEMP. RATINGS: CS50 - 100 PSIG at 95°C CS60 - 100 PSIG at 120°C CONNECTIONS: Process - 1" N PT Electrical - Spade lug terminations on cable. WETTED MATERIALS: Insulator: CS50 - CPVC; CS60 - Teflon/Kynar O-rings - EPR Electrodes - 316SS standard, optional materials available on request. PROBE CONSTANT: 2.0/1.0/0.2/0.1 TEMPERATURE COMPENSATION: Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.