sdi2

(Return to Conductivity Sensors)

Model CS52 Conductivity Sensor
Click on part number above to request an RFQ or place an order online.

Very compact size for a high probe constant sensor
0-ring seals used on all versions for high on-stream reliability
Thermowell for the temperature element assures rapid response
This sensor has a small footprint for its high probe constant of 10.0. Its size and economical pricing make it ideal for use in various OEM applications, such as skid mounted R.O. systems, water treatment units, chemical dilutions, and many more.
Application Notes
Wetted materials of construction are 316 stainless steel and CPVC, with double EPR o-ring seals. The outer o-ring is the only one to touch the process fluid, allowing the rear seal to operate free from chemical attack. The thermowell containing the temperature sensing element in its tip is exposed directly to the stream, assuring rapid automatic compensation for maximum accuracy.
Process connections are 3/4" NPT for insertion, and the back portion is 3/4" stainless steel tubing, which can be gripped by a swage fitting for submersion applications. When longer cable runs than the standard ten feet are required, a junction box can be attached to the back of the sensor in the same manner. A Teflon insulator is available as an option to the standard CPVC.

SPECIFICATIONS
MAX. PRESSUREITEMP. RATINGS:
100 PSIG at 95°C

CONNECTIONS:
Process - 3/4" NPT
Electrical - Spade lug terminations on cable.
WETTED MATERIALS:
Insulator - CPVC
O-rings - EPR
Electrodes - 316SS
PROBE CONSTANT:
10.0
TEMPERATURE COMPENSATION:
Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.

(Return to Conductivity Sensors)
	Model CS52 Conductivity Sensor Click on part number above to request an RFQ or place an order online. Very compact size for a high probe constant sensor 0-ring seals used on all versions for high on-stream reliability Thermowell for the temperature element assures rapid response This sensor has a small footprint for its high probe constant of 10.0. Its size and economical pricing make it ideal for use in various OEM applications, such as skid mounted R.O. systems, water treatment units, chemical dilutions, and many more. Application Notes Wetted materials of construction are 316 stainless steel and CPVC, with double EPR o-ring seals. The outer o-ring is the only one to touch the process fluid, allowing the rear seal to operate free from chemical attack. The thermowell containing the temperature sensing element in its tip is exposed directly to the stream, assuring rapid automatic compensation for maximum accuracy. Process connections are 3/4" NPT for insertion, and the back portion is 3/4" stainless steel tubing, which can be gripped by a swage fitting for submersion applications. When longer cable runs than the standard ten feet are required, a junction box can be attached to the back of the sensor in the same manner. A Teflon insulator is available as an option to the standard CPVC.
SPECIFICATIONS MAX. PRESSUREITEMP. RATINGS: 100 PSIG at 95°C CONNECTIONS: Process - 3/4" NPT Electrical - Spade lug terminations on cable. WETTED MATERIALS: Insulator - CPVC O-rings - EPR Electrodes - 316SS PROBE CONSTANT: 10.0 TEMPERATURE COMPENSATION: Standard element is 10KΩ @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. Other TC's available by specifying instrument make and model.