sdi2

(Return to 2/Wire Transmitter)

Model CT98 Conductivity Analyzer
Click on part number above to request an RFQ or place an order online.

Low cost
Analog display
Alarm relays
Low maintenance
The Model CT98 is a reliable analog instrument, economically priced and engineered for ease of operation. Successful applications range from boiler blowdown control, which protects equipment from scale or corrosion, to plating rinse tank control, which helps to ensure consistent product quality. This simple to use instrument provides dependable measurements in complex process systems.
Depending on application variables, select a span as low as 0 to 5 S/cm escalating to 0 to 2,000,000 S/cm and an appropriate sensor. The high resolution dial display is accurate to +/- 2%. Special dials are available for PPM, TDS and percent concentration readouts.
Two 5 amp relays actuate control valves or alarms when high/low set points are exceeded. Set points can be configured for fail-safe operation. In addition, two signal outputs of 0-5 and 4-20 mA are standard with each unit.

SPECIFICATIONS
Display: analog meter, 0 to 100%, +/-2% accuracy
Alarm hysteresis: 2% FS
Alarm relays: dual SPST; 5A @ 250 VAC; 5A @ 30 VOC
Output: 4-20 mA dc and 0-5 VDC (non-isolated)
Power requirements: 120/240 VAC ( +/- 10%) 50/60 hz
Range: full scale
Enclosure Dimensions: 5.5" x 5.5" depth 5.1"
K=0.05: from 2 µ S to 4, 000 µ S
K=2.0: from 50µ S to 200,000 µS
K = 20.0: from 1,000,µS to 2,000,000µS
Materials: ABS
Rating: general purpose
Accuracy: +/-1% FS
Repeatability: +/-0.5% FS
Temp. compensation: 0 to 100°C, fixed 2%°C (10K)
Alarm: high/low, 0 to 100% FS
Ordering Information: P/N 3-9859
Description: Analog Conductivity Analyzer with 0-100% dial face. Dial faces with a dedicated range (specify range).

(Return to 2/Wire Transmitter)
	Model CT98 Conductivity Analyzer Click on part number above to request an RFQ or place an order online. Low cost Analog display Alarm relays Low maintenance The Model CT98 is a reliable analog instrument, economically priced and engineered for ease of operation. Successful applications range from boiler blowdown control, which protects equipment from scale or corrosion, to plating rinse tank control, which helps to ensure consistent product quality. This simple to use instrument provides dependable measurements in complex process systems. Depending on application variables, select a span as low as 0 to 5 S/cm escalating to 0 to 2,000,000 S/cm and an appropriate sensor. The high resolution dial display is accurate to +/- 2%. Special dials are available for PPM, TDS and percent concentration readouts. Two 5 amp relays actuate control valves or alarms when high/low set points are exceeded. Set points can be configured for fail-safe operation. In addition, two signal outputs of 0-5 and 4-20 mA are standard with each unit.
SPECIFICATIONS Display: analog meter, 0 to 100%, +/-2% accuracy Alarm hysteresis: 2% FS Alarm relays: dual SPST; 5A @ 250 VAC; 5A @ 30 VOC Output: 4-20 mA dc and 0-5 VDC (non-isolated) Power requirements: 120/240 VAC ( +/- 10%) 50/60 hz Range: full scale Enclosure Dimensions: 5.5" x 5.5" depth 5.1" K=0.05: from 2 µ S to 4, 000 µ S K=2.0: from 50µ S to 200,000 µS K = 20.0: from 1,000,µS to 2,000,000µS Materials: ABS Rating: general purpose Accuracy: +/-1% FS Repeatability: +/-0.5% FS Temp. compensation: 0 to 100°C, fixed 2%°C (10K) Alarm: high/low, 0 to 100% FS Ordering Information: P/N 3-9859 Description: Analog Conductivity Analyzer with 0-100% dial face. Dial faces with a dedicated range (specify range).